yy亚洲人成电影网站色,下面一进一出好爽视频,国产网站视频,久久综合狠狠综合久久,欧美精品在线看,国产精品短视频,年轻女教师hd中字3,亚洲中文字幕手机在线第一页
            0086 391 3299607

            Common Questions

            Characters of Mastication of Common Rubber

            Release:emykpehf View:2662

              1: natural rubber

              Natural rubber is easy to obtain plasticity. Constant viscosity and low viscosity standard maleic West pressure rubber have low initial viscosity and generally do not need to be plasticized. If the Mooney viscosity of other types of standard rubber is greater than 60, it still needs to be plasticized The roller temperature is 30 ℃ - 40 ℃, and the time is about 15-20min. When the temperature is above 120 ℃, the time is about 3-5min. When plasticizers or plasticizers are added, the plasticizing time can be significantly shortened and the plasticizing effect can be improved.

              2: styrene butadiene rubber

              Generally speaking, the Mooney viscosity of SBR is between 35-60. Therefore, styrene butadiene rubber can not be plasticized. But in fact, after plasticizing, the dispersibility of the admixture can be improved and the product quality can be improved. Especially for sponge rubber products, SBR is easy to foam after being plasticized, and the bubble hole size is even.

              3: polybutadiene rubber

              Cis-1,4-polybutadiene rubber has cold fluidity, which is not easy to improve the plasticizing effect. At present, the Mooney viscosity of common cis-1,4-polybutadiene rubber has been controlled in a proper range (45 ° ± 5 °) during polymerization. Therefore, it is generally not necessary to plasticize to directly mix.

              4: Neoprene

              Generally, the chloroprene rubber does not need to be plasticized, but due to the large toughness of the rubber, the thin pass of the open mill is used 3-5 times before mixing, which is helpful for operation. The thin pass temperature is generally 30 ℃ - 40 ℃, too high and easy to stick the roller.

              5: ethylene propylene rubber

              Because the main chain of ethylene propylene rubber is saturated structure, it is difficult to break down the molecule in the plasticizing process. Therefore, it is advisable to make it have suitable Mooney viscosity by synthesis without plastic refining.

              6: butyl rubber

              Because of its stable chemical structure, soft, small molecular weight and high fluidity, butyl rubber has little mechanical plasticizing effect. Generally, butyl rubber with low Mooney viscosity can be directly mixed without being plasticized. Butyl rubber with high Mooney viscosity can be plasticized by high temperature chemical method.

              7: NBR

              NBR has small plasticity, large toughness and large heat generation during plastic processing. Therefore, it is usually used in the open mill at low temperature (below 40 ℃), small roll spacing (about 1 mm), low capacity (70% of natural rubber) and staged plastic processing, which can achieve better results. NBR should not be molded by internal mixer. Soft NBR has a certain plasticity (generally less than 60 °), so it can be directly mixed without plastic refining.


            Recommended Information

          1. Telephone
          2. message
            Message
          3. map
            Map
          4. ewm
            QR code
          5. 主站蜘蛛池模板: 日本专区一区二区三区| 仁布县| 国产成人久久精品流白浆| 镇远县| 一区二区三区四区亚洲天堂 | 91精品人妻一区二区三区蜜臀| 久久精品无码一区二区三区不卡| 重庆市| 国产成人精品蜜芽视频| 国产精品玖玖资源站大全| 色爱综合亚洲av综合| 蜜桃在线播放免费一区二区三区 | 特级毛片全部免费播放a一级| 亚洲熟伦在线视频| 日韩一二三四精品免费| 亚洲一区二区精品在线看| 国产一区二区亚洲精品| 中文字幕日韩精品美一区二区三区| 亚洲无码观看a| 中文字幕人妻丝袜成熟乱| 国语国产激情对白在线| 亚欧免费无码AⅤ在线观看| 久久久国产不卡一区二区| 女优av福利在线观看| 视频女同久久久一区二区三区| 日韩人妻中文字幕一区二区| 德州市| 洪江市| 嵊泗县| 亚洲AV无码一区二区一二区教师 | 亚洲欧洲国无码| 国产美女三级视频网站| 日本视频精品一区二区| 亚洲AV无码一区二区一二区教师| 日韩中文字幕无码av| 在线视频一区二区亚洲| 日本加勒比在线一区二区三区| 亚洲国产成人精品毛片九色| 免费视频一区二区三区亚洲激情| 中文字幕乱码亚洲无线| 亚洲国产精品免费一区|